Receiving Buffer - Port 9100; Other Settings; Print Area; Substitute Tray - Xerox 4112 System Administration Manual

Receiving Buffer - Port 9100

Set the Port9100 receiving buffer. Set a value from 64 to 1024 KB, in 32 KB increments.

Other settings

For information about each of the following items, refer to "Overview of features" in this guide.
Make settings relating to the paper used in the machine.
1. From the Print Service Settings screen, select Other Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the item to be changed.
4. Select Save to save the setting and return to the previous screen.

Print Area

Select whether or not to expand the print area.
For information about the print area, refer to the section of the User Guide entitled "Printable
area".

Substitute Tray

When there is no tray containing the paper size selected by the automatic tray selection, select
whether or not to print replaced with paper loaded in another paper tray. In the event of using
substitute tray, set the size.
• Display Message: Do not use substitute tray, but display a paper loading message.
Use Larger Size: Replace with the next larger paper size than that selected, and print at
•
the same size.
• Use Closest Size: Replace with the closest paper size to that selected, and print. If
necessary, the printing is automatically reduced in size.
Note
If there is a client specification, the client specification takes precedence.
• Select Tray 5 (Bypass): Prints on the paper loaded in tray 5.
Xerox 4112/4127 EPS
System Administration Guide
Setups
3-73