Paper Size; Paper Type - Xerox 4112 System Administration Manual
Xerox enterprise printing systems system administration guide
Hide thumbs
Also See for Xerox 4112:
- User manual (436 pages) ,
- System administration manual (380 pages) ,
- Instruction manual (46 pages)
Table of Contents
Advertisement
3. Select Paper Size or Paper Type.
Paper Size
Standard-sized paper that is loaded into trays 3, 4, 6, and 7 is automatically detected. However,
when a nonstandard size is loaded, it is necessary to specify the width and height.
Tip
Depending on the paper size, the guide lever may not fit, and this may cause paper jams or
other errors. Tray detection may also not be possible. In such cases, use tray 5 (Bypass
Tray).
Note
Trays 1 and 2 are preset at manufacturing at size 8.5 x 11 in. (A4); therefore, the paper size
for these two trays cannot be changed on this screen.
Paper Type
The Paper Type feature is discussed on the following pages.
1. When selecting Paper Size, select Auto Size Detect or Variable Size.
Tip
Remember, you cannot select or set the paper size for trays 1 and 2.
When Variable Size is selected, enter the paper size using
,
,
, and
.
Xerox 4112/4127 EPS
System Administration Guide
Setups
3-19
Advertisement
Table of Contents
