Xerox 4112 System Administration Manual page 58

Setups
3. Enter the value obtained by the difference X measured in Step 1 added as the current
setting value of Side 1 and Side 2 of X Print Position.
Enter the value obtained by the difference Y measured in Step 1 added as the current
setting value of Side 1 and Side 2 of Y Print Position.
Note
X Print Position: Specify a positive value when you want to move the position of the image
in the opposite direction to the paper feed direction, and a negative value when you want
to move the position of the image in the paper feed direction.
Y Print Position: Specify a positive value when you want to move the position of the image
toward the back of the machine, and a negative value when you want to move the position
of the image toward the front of the machine.
4. Press Save.
3-42
Xerox 4112/4127 EPS
System Administration Guide