Auto Size Detect; Variable Size - Xerox 4112 System Administration Manual

Setups

Auto Size Detect

Standard-sized paper loaded in trays 3, 4, 6, and 7 is automatically detected.

Variable Size

When setting a non-standard size for trays 3 and 4, set the size in the X (horizontal) direction
within the range of 182-488 mm (7.2-19.21 in.) and in the Y (vertical) direction within the range
148-330 mm (5.5-13 in.) in 1 mm increments. For trays 6 and 7, set the size in the X direction
within the range 210-241 mm (8.3-9.5 in.) and in the Y direction within the range 297-330 mm
(11.7-13 in.) in 1 mm increments.
1. From the Paper Size screen, select Save to save the paper size and return to the previous
screen.
2. To change the paper type for this tray, select Paper Type.
When selecting Paper Type, keep the following in mind:
• For trays 1, 2, 6, and 7 you can select from six paper types and from custom paper
types 1-5.
• For trays 3 and 4 you can select from seven paper types, and from custom paper types
1-5.
• In tray 5 (Bypass) you can select from eleven paper types and from custom paper types
1-5.
• If the optional OHCF (tray 6) is installed, an additional Paper Type option, Coated
Stock, is available for selection.
3. Select the desired Paper Type for this specific tray. For this procedure, Tray 4 is shown.
3-20
Xerox 4112/4127 EPS
System Administration Guide