Xerox 4112 System Administration Manual page 116

Accounting and Authentication/Security Settings
The functions restricted by Remote Access are as follows:
• Printing is limited to print jobs sent from a computer.
• To use the Account Administration feature, use the print driver to set account information
such as user ID and passcode.
• If authentication using account information fails for a print job, the print data will be either
saved in the machine or deleted depending on the Charge Print settings.
•
• Printing is not limited when the Login Type is set to Login to Remote Accounts in System
Administrator mode.
• If the Authentication feature is enabled, authentication is required to access the
CentreWare Internet Services home page even if you are not using the Authentication
feature for any service.
Create / View User Accounts and Reset User accounts are made unavailable once you enable
Login to Remote Accounts.
If you choose this option and select Save, accounting will be automatically disabled. However,
job log will be kept instead.
Note
A registered user ID on the remote authentication server can be a maximum of 32
characters, and the password a maximum of 128 characters. For SMB authentication,
however, the password can be a maximum of 32 characters.
You will prompted to confirm your selection. Be sure to review the changes that will occur once
Login to Remote Accounts is enabled. Select Yes to enable Login to Remote Accounts.
4-24 Xerox 4112/4127 EPS
System Administration Guide
Xerox 4112/4127 EPS