Installing The Idnet Card Onto The Pdi; Overview; Figure 8-2. Mounting Onto The Power Distribution Interface - Simplex 4100U Installation & Maintenance

Installing the IDNet Card onto the PDI

Overview

IDNet CARD
#6 SCREWS
The 4100-series IDNet card is designed to be mounted on the PDI in a 4100U expansion
cabinet. The card can be mounted on any of the PDI connectors.
Use connector P2, labeled on the back side of the IDNet card, to connect to any of the
eight PDI connectors as shown in the figure below.
STANDOFFS
SCREW
RETAINERS

Figure 8-2. Mounting onto the Power Distribution Interface

WASHERS
PDI CONNECTOR
(reverse side)
8-4
PDI