Miniplex System Components (Non-4100U); Overview; The Rui Card; Transponder Cabinets - Simplex 4100U Installation & Maintenance

MINIPLEX System Components (Non-4100U)

Overview

The RUI Card

Transponder
Cabinets
The 4100 MINIPLEX system is comprised of a host panel containing everything required
in a standalone cabinet (see Chapter 2), plus:
•
An RUI module in the master controller bay
•
One or more remote MINIPLEX transponder cabinets
•
A RIC II card in each transponder cabinet
This section describes each component in turn.
The RUI module consists of a motherboard and daughter card, which are used in the
master controller bay of a MINIPLEX system to extend the length of communications
wire to reach remote bays.

Figure 3-2. The Remote Unit Interface Card

The RUI card mounts onto a 562-799 or 562-856 Motherboard.
Communication wiring from the RUI module in the host panel extends to the RIC II card
in a remote transponder cabinet.
3-32
Continued on next page