Chapter 8 Installing 4100U Idnet & 4100Mxp Cards; Introduction; In This Chapter - Simplex 4100U Installation & Maintenance

Installing 4100U IDNet & 4100MXP Cards

Introduction

In this Chapter

Chapter 8
Two loop cards are available in the 4100U 4"x 5"card format. These plug directly onto
the PDI and form an intelligent interface between the 4100U CPU and one loop of
addressable detectors/devices.
The IDNet Card uses Mapnet Protocol and communicates with existing Mapnet
detectors/devices plus the new IDNet devices.
The 4100MXP communicates with the Tyco MX range of detectors/devices.
Refer to the page number listed in this table for information on a specific topic..
The IDNet Card
Installing the IDNet Card onto the PDI
Installing the ID-Net into a 4100 Card Bay
Configuring the Card
Wiring to IDNet Devices
Troubleshooting on IDNet
The 4100MXP
Topic
8-1
See Page #
8-2
8-4
8-5
8-6
8-7
8-10
8-11