Automatic Connection; Automatic Call Acceptance; Telephone Volume - Becker BE A00 Operating Manual

Automatic connection

With the Auto-connect button, you can
switch on or off whether an automatic
connection to a cell phone is attempted
after switching on the Navigation device.
> In the settings menu, press the
connect button.
Depending on the previous setting, you
can switch the function on or off.
• Top icon: function on
• Bottom icon: function off

Automatic call acceptance

With this function, you can set whether
or not or after which time an incoming
call is accepted automatically.
Auto-
> In the settings menu, press the
accept call button.
> Select whether incoming calls will be
accepted automatically after 3, 5 or 10
seconds.
Off
If you select , the function is switched
off.
The setting currently
indicated with a checkmark (
> Confirm your settings by pressing the
back button

Telephone volume

With this function, you can set the
volume of the ringtone and the volume
of the call.
> In the settings menu, press the
Auto-
Volume
> Select the desired volume with the
> Press the
volume. By pressing the
again, the telephone volume is
selected is switched back on.
> Confirm your settings by pressing the
).
back button
.
TELEPHONE MODE
button.
and buttons.
Mute
button to mute the
button
.
>>>
> D
> GB
> F
> I
> PL
121