Table of Contents
Advertisement
> Press the remote control onto the
base plate.
> Hold the bottom part of the remote
control and turn the remote control
clockwise until it locks into place.
Removing the remote control
You can remove the remote control
again, to change the battery for example.
> Hold the bottom part of the remote
control and turn the remote control
anti-clockwise
until
it
detached from the base plate.
Connecting the remote control to the
Navigation device
Connecting for the first time
> Switch on the Navigation device.
1
> Press the button
control.
becomes
The connection to the Navigation device
is established.
Notice:
The car adapter cable with radio remote
control receiver must be connected to
the cigarette lighter and navigation sys-
tem and be supplied with power. The ra-
dio receiver is in the plastic case on the
cable.
GENERAL OPERATION
2
3
on the remote
1
33
>>>
> D
> GB
> F
> I
> PL
Advertisement
Table of Contents
