Automatic Connection; Searching For Cell Phones - Becker READY 45 LMU Operating Manual

Selection Meaning
Protect entry The device is protected
against automatic dele-
tion (only available for
unprotected devices).
Remove The protection of the de-
protection vice is canceled (only
available for unprotect-
ed devices).
Move up
/ The device is moved one
Move down
position forwards/back-
wards.
Delete
The device is deleted
from the device list.
Delete All
All devices are deleted
from the list (even the
protected entries).

Automatic connection

After activation, your Navigation device
attempts to establish a connection to the
cell phone last connected.
Note:
The cell phone last connected is then
only connected if no protected device is
in front of this device in the device list.
You can switch this function on or off as
described in "Automatic connection" on
page 116.
Prerequisites for a successful connec-
tion are:
• On your Navigation device, Bluetooth®
is switched on. (See "Switching
Bluetooth on and off" on page 116.)
• The cell phone is switched on, is within
range, and Bluetooth® is activated.
TELEPHONE MODE

Searching for cell phones

Note:
Prior to a search, switch on Bluetooth®
on the cell phone to be searched for.
> Call up the device list.
Search Bluetooth phones
> Press the
button.
The search starts.
During the search, any devices found are
displayed and you may cancel the search
by pressing the Stop search
After the search or after you press the
Stop search
, a list of the devices found is
displayed.
>>>
> D
> GB
> F
> I
> PL
button.
111