Automatic Connection; Searching For Cell Phones - Becker GPS Navigator Operating Manual

Automatic connection

After activation, your Navigation device
attempts to establish a connection to the
cell phone last connected.
You can switch this function on or off as
described in "Automatic connection" on
page 118.
Prerequisites for a successful connec-
tion are:
• On your Navigation device, Bluetooth®
wireless technology is switched on.
(See "Bluetooth®" on page 118.)
• The cell phone is switched on, is within
range, and Bluetooth® wireless
technology is activated.

Searching for cell phones

Note:
Prior to a search, switch on Bluetooth®
on the cell phone to be searched for.
> Call up the device list.
Search Bluetooth
> Press the
button.
The search starts.
During the search, any devices found are
displayed and you may cancel the search
by pressing the Stop search
After the search or after you press the
Stop search
, a list of the devices found is
displayed.
> Then select the name of the cell phone
to be connected.
The Navigation device will then attempt
to establish the connection. On the cell
phone, the password prompt should
then occur. This password is fixed by
Navigation device.
®
phones
button.
> Enter the password displayed on the
cell phone.
The connection will be established. With
a successful connection, the telephone
menu will be displayed.
TELEPHONE MODE >>>
113