Activating/Deactivating Automatic Connection; Refreshing The Phonebook; Setting The Telephone Volume; Device Name - Becker Traffic Assist Z 200 Operating Instructions Manual

>>> TELEPHONE MODE
Activating/deactivating automatic con-
nection
> D
Here you can specify whether, after the
> GB
Traffic Assist is switched on, a connection
should automatically be established with
> F
the last mobile phone connected.
> Press the Automatic connection button
> I
in the telephone/Bluetooth settings to
> E
activate or deactivate
connection.
> P

Refreshing the phonebook

> NL
You can instruct your Traffic Assist to
> DK
transfer the phonebook data from the mo-
bile phone again. The phonebook is then
> S
refreshed accordingly.
> Press the Reload Phonebook button in
> N
the telephone/Bluetooth settings.
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
90

Setting the telephone volume

You can set the volume of the telephone.
> Press the
Volume
phone/Bluetooth settings.
automatic
> Select the desired volume using the
and
> Confirm your settings by pressing the
button.
OK
Note:
The volume can also be changed using
the volume control located on the side.
See "Volume control" on page 34..

Device name

You can give your Traffic Assist a name.
button in the tele- This name will be displayed by other
Bluetooth devices.
Note:
The current name is shown in brackets
on the
> Press the
in the telephone/Bluetooth settings.
An input menu opens.
> Enter the desired name.
buttons.
button.
Change device name
button
Change device name