Calibration (Depending On The Model); Basic Information About The Menus; The Main Menu - Becker BE A00 Operating Manual

Note:
When making movements with several
fingers, you should avoid having them
exactly one upon the other, otherwise
this can cause malfunctions. If both fin-
gers are slightly offset diagonally or are
next to each other, movements with two
fingers will then be detected reliably.
Capacitive displays can only be used
with your fingers or an electroconducti-
ve pen. Operation with gloves, finger-
nails or a plastic stylus, for example, is
not possible.

Calibration (depending on the model)

If the touch screen starts responding
imprecisely, calibration
undertaken.
The calibration function is started from
the menu (see also page 135).
Basic information about the
menus
During operations, you are assisted by
various menus and entry windows.

The main menu

The top menu level is the main menu.
The individual applications are started
from the main menu.
You will find information about the indi-
should be
vidual applications in the corresponding
main chapters.
In addition to the individual applications,
the main menu also contains further
information and operating options.
GENERAL OPERATION
You can tell whether a telephone is
already connected by the symbol on the
Phone button.
1 2
Telephone connected
1
Telephone not connected
2
A satellite symbol on the left-hand side
New destination
of the button indicates
whether there is currently any GPS
reception.
1 2
GPS reception
1
No GPS reception
2
>>>
> D
> GB
> F
> I
> PL
27