Sounds; Audio Routing (Depending On The Model); Rear View Camera (Depending On The Model) - Becker BE A00 Operating Manual

>>> SETTINGS

Sounds

You can switch the Navigation device
> D
signal tone on and off. This also includes
> GB
the clicking of the touch screen buttons.
> Press the
Tones
> F
Depending on the previous setting, the
> I signal tones are switched on or off.
> PL
• Top icon: Tones switched on
• Bottom icon: Tones switched off

Audio Routing (depending on the model)

Once you have connected your navigati-
on system to the audio system of your
vehicle using a suitable cable, (see chap-
ter "Cable for vehicle integration (depen-
ding on model, optional)" on page 22),
you can redirect the sound output of your
navigation system to your vehicle
loudspeakers.
138
> Press the button Audio Routing
button.
You can choose from the following opti-
ons:
Selection
Phone:
Audio Out
Navigation:
Audio Out
Phone:
Tel-Mute
Navigation:
Tel-Mute
Meaning
When you call via a phone
connected to the device,
the audio output is redi-
rected to the vehicle
loudspeakers
The navigation announce-
ments are redirected to
the vehicle loudspeakers
During a phone call, the
audio system of your ve-
hicle is muted
During an announcement
of your navigation sys-
tem, the audio system of
your vehicle is muted
Rear view camera (depending on the
model)
Once you have connected your navigati-
on system to a rear view camera using a
suitable cable, (see "Cable for rear view
camera (depending on the model, optio-
nal)" on page 22) you can display the
image of the rear view camera on your
navigation system.
> Press the button rear view camera
You can choose from the following
options: