Ending A Call; During A Call - Becker BE A00 Operating Manual

>>> TELEPHONE MODE

Ending a call

> D
You can end an active call.
> GB
> In the call screen, press the
> F
button.
> I
The call is ended. The screen last active
is displayed.
> PL
Note:
The call is also ended if the other party
hangs up. The screen last active is also
displayed.
118

During a call

During a call, you have various control
options.
End call
In the call display, the signal strength of
the cell phone, the charging level of the
cell phone, the telephone name and the
network provider are displayed if availa-
ble in the upper area.
Beneath, the call time and, if available,
the phone number or name the name of
the other party are displayed.
If route guidance is active, then you will
receive the navigation instructions with
arrows on the call screen.
Note:
If during a call there is another incoming
call, this is not indicated. But the number
of the caller is displayed in the number
list.
> To call the options menu of the call
screen, press the Options
Volume
•
By pressing the Volume , you can call
the volume adjustment. See
"Telephone volume" on page 121.
Microphone off Microphone on
• /
For a private conversation in a vehicle,
you can switch off the microphone of
the Navigation device. The other party
on the phone will not hear anything.
Press the Microphone off button to
switch off the microphone. Press the
Microphone on
button to switch the
microphone back on.
button.