The Reset Button - Becker BE A00 Operating Manual

>>> NAVIGATION MODE
If the automatic function is switched off,
you can select the desired time zone by
> D
pressing the button below
> GB
zone
.
Pressing the button below
> F
saving time
allows you to select whether
> I daylight saving time should be set
automatically by the Navigation device or
> PL
whether you switch daylight saving time
on and off yourself.
86

The Reset button

You can reset the navigation settings to
Use auto time
their factory settings.
The settings will then be reset. The fast
Daylight
access mode data, stored routes,
blocked routes, voice and home address
are retained.
> Press the
> Press the
The navigation settings are reset to their
factory settings.
Reset button.
Yes
button.
Traffic announcements using
TMC (depending on the model)
Your Navigation device can receive
traffic announcements (TMC messages)
from radio stations. The power supply
with the integrated TMC antenna must
be connected to the carrier plate for this
function.
Note:
TMC is not available in all countries.
Traffic announcements are transmitted
by radio stations via the TMC (Traffic
Message Channel) in addition to the
radio programme and are received and
analysed by the navigation system.
Receiving traffic announcements is free
of charge.