Proactive Auto Start - Becker BE A00 Operating Manual

Selection Meaning
Automatic
The navigation system swit-
ches over to the image of the
reversing camera as soon as
an image signal is sent. Nor-
mally, this is always the case
once the reverse gear has
been engaged
Manual
It is possible to manually
switch over to the reversing
camera. In the Tools
a corresponding menu item
is then available

ProActive Auto Start

You can start your navigation system au-
tomatically before driving off in your car.
The display does not have to remain on
the windscreen, just the basic unit needs
to be connected to the windscreen with
the cable.
When you drive off, your navigation sys-
tem will already have an overview of the
current traffic situation. Thus, you can al-
ready get in your car and drive off just
like with the auxiliary heater of your car.
> Press the ProActive Start button
menu,
You can choose from the following
options:
Selection Meaning
Automatic
The ProActive Starte detects
automatically when you dri-
ve off normally with your
can and switches on the
basic unit shortly before-
hand to search for TMC
messages and to determine
the current location.
Note: You must already
have used your navigation
device for several weeks,
otherwise your navigation
system will not yet know
your user habits.
You can reset the function
with the button
could be necessary if your
driving habits have changed
drastically.
Manual
You can define up to two
wake-up times per week-
day. The device will then
switch on briefly before-
hand. To do this, press the
button . The time is set
similarly as described on
Seite 130.
SETTINGS >>>
> D
> GB
> F
> I
> PL
. This
139