Service Information; Factory Settings - Becker BE A00 Operating Manual

>>> SETTINGS
> D
> GB
> F
> I
Press the Set Auto-connect button. A list
> PL
of possible telephones is displayed that
you can use as a trigger for this profile,
select the corresponding telephone by
pressing the appropriate button.
142

Service information

The following button
information regarding the Navigation
device.
> Press the
Information
button.
The information display appears with the
software version number.
Service information
By pressing the
ton, you can display further information
such as used licences, installed contents
and map material. Always quote these
details in enquiries to the service provid-
ed by United Navigation GmbH.

Factory settings

displays You can reset your Navigation device to
the factory settings.
The following updated data is deleted:
saved destinations, saved routes, the
home address, telephone data, images,
videos etc. saved on the internal memory.
> Press the
Factory reset
but-
> Press the
Yes
button.
The Navigation device is reset to the
factory settings.
button.