Switching On; Switching Off (Depending On Model) - Becker BE A00 Operating Manual

Switching on

> Press the button on the top of the
Navigation device.
The unit is switched
manufacturer's logo appears on the
touchscreen.
When the Navigation device is started for
the first time, the language selection is
displayed automatically.
Using the buttons or the scroll
wheel, it is possible to scroll through the
list in the direction of the relevant arrow.
> Press the button for the required
language.
> The selection is confirmed by pressing
OK
.
on. The
> Then select the desired voice.
Note: for models with TTS
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).
A short example announcement is given.
> Confirm your selection by pressing the
OK button.
The following prompt appears shortly
afterwards:
GENERAL OPERATION
> If you agree to the request contained in
OK
this prompt, press the
Note:
Use of the Navigation device is only
permitted in accordance with the
national road traffic
applicable at the time.

Switching off (depending on model)

You can switch the unit off at any time.
> Press the button on the top of the
Navigation device.
The Navigation device switches to sleep
mode.
> Before finally switching off the naviga-
tion device, press the I/O switch on the
underside of the device to 0.
>>>
> D
> GB
> F
> I
> PL
button.
regulations
25