Table of Contents
Advertisement
Greenfield deployment
In an S8300 configuration, a C-LAN circuit pack is not needed. All signaling traffic is sent
directly to the S8300 Ethernet interface. The S8300 Server performs all C-LAN functions
natively. The connectivity between the endpoint and the server is:
Endpoint
Figure 29: Signaling path (S8700 / G650 configuration)
Note:
In the IP-Connect S8700 / G650 configuration each Port Network has an IPSI
Note:
circuit pack.
As
Figure 30: Media flow path (S8700 IP-Connect configuration)
Telephone sends all media streams to the MedPro. Once a call is established, if the remote
endpoint is another IP Telephone, the media stream might shuffle (be redirected to the other
endpoint) without requiring MedPro resources. Media Processors are also used to transport
media streams in IP tie trunks.
82 Avaya Application Solutions IP Telephony Deployment Guide
IP network
S8300 Media Server
on page 83 shows, an IP
Advertisement
Table of Contents
