Table of Contents
Advertisement
4. Install UPS units.
5. For IPSI-connected port networks, upgrade each EPN.
6. Connect the duplication links.
7. Connect the servers and the IPSIs to the control LAN.
8. Sequentially bring up the duplicated servers.
Figure 33: S8700 Media Servers (Multi-Connect configuration)
1, an S8700 Multi-Connect system that supports only traditional endpoints.
Figure 33: S8700 Media Servers (Multi-Connect configuration)
Note:
In the traditional PBX system, signaling and bearer traffic for all calls connects
Note:
through the TDM buses within Port Networks and the ATM or traditional center
stage
Migration from DEFINITY Server R to S8700 Multi-Connect
shows the completion of Phase
Issue 3.4.1 June 2005
87
Advertisement
Table of Contents
