Table of Contents
Advertisement
Adding the DHCP option
Use the following procedure to add the DHCP option:
1. Highlight the scope that you just created.
2. Select Scope under DHCP OPTIONS.
3. Select the 176 option that you created from Unused Option List.
Avaya recommends that the IP Telephones be provisioned with sequential IP addresses.
You will activate the scope when all options have been set.
4. Click Add.
5. Select option 003 from the Unused Options List.
6. Click Add.
7. Click OK.
8. Chose the Global parameter under DHCP Comments.
9. Select the 176 option that you created from the Unused Option List.
10. Click Add.
11. Click OK.
Activating the leases
To activate the leases, click Activate under the Scope Menu, and the icon for the scope should
light.
Verifying your configuration
This section describes how to verify that the 46XXOPTIONs are correctly configured for the
Windows NT 4.0 DHCP server.
To verify the default option (176 46XXOPTION)
Use the following procedure to verify the default option:
1. Select Start>Programs>Admin Tools>DHCP Manager.
2. Expand Local Machine in the DHCP Servers window.
3. In the DHCP Servers frame, click the scope for the IP Telephone.
4. Select Defaults from the DHCP_Options menu.
5. In the Option Name list, select 176 46XXOPTION.
6. Verify that the Value String box contains the correct string.
7. If not, update the string, and click OK twice.
Issue 3.4.1 June 2005
DHCP
407
Advertisement
Table of Contents
