Table of Contents
Advertisement
Avaya TFTP (Suite Pro) configuration
Use the following procedure to configure the Avaya TFTP server:
1. Select Start->Programs->Avaya TFTP Server >TFTPServer32 to run the TFTP Suite Pro
server.
The TFTP server starts.
!
WARNING:
You must restart Avaya TFTP manually every time you reboot your TFTP server.
WARNING:
2. Select System->Setup.
On the Outbound tab (page 1) the Outbound path should be the TFTP file path.
3. Select Enable Path.
4. Under the Options tab, select No Incoming.
5. Under the Client Limits tab, Set the Maximum Simultaneous Clients to infinite by dragging
the slide bar all the way to the right.
6. Place the 46xxupgrade.scr file in the file path directory. (The filename 46xxupgrade.scr is an
example, not the filename you will use.)
Issue 3.4.1 June 2005
TFTP
413
Advertisement
Table of Contents
