1.1 General Features
Ringing Tone Selection for CO Buttons
Description
Allows the proprietary telephone user to select the desired ringer frequency for each CO button.
This provides discrimination of incoming outside calls.
Conditions
There are eight ringer frequencies available. One of them can be assigned to a CO button that
is assigned as each of the following buttons: Single-CO, Group-CO, or Loop-CO button. It is
not possible to assign a ringer frequency to any other button.
Programming Guide References
• [005] Flexible CO Button Assignment
Features Guide References
None
User Manual References
• 4.1.3 Customising the Buttons
196
Features Guide