Disa Ring Time After Intercept; Disa No Dial Mode; Disa Security Mode - Panasonic KX-TA824 Programming Manual

Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.68 Intercept Routing

[509] DISA Ring Time after Intercept

Selects the length of time to ring the destination extension when a DISA call is redirected to the intercept
destination after the time specified in [508] DISA Ring Time before Intercept expires. When the destination
extension does not answer the call within the preprogrammed time period, the call is disconnected.
5 0 9
Programming Manual References
[507] DISA Intercept Mode
[508] DISA Ring Time before Intercept
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.68 Intercept Routing

[510] DISA No Dial Mode

Selects how DISA calls are handled when the PBX does not receive either DTMF (Dual Tone Multi-
Frequency) signals or a fax (CNG) tone within a preprogrammed time period.
5 1 0
Feature Manual References
1.1.41 Direct Inward System Access (DISA)

[511] DISA Security Mode

Selects the DISA security mode to prevent unauthorized access to the PBX. In Trunk or All security mode,
the caller is required to enter a DISA security code.
5 1 1
Notes
Trunk Security: Requires the caller to enter a DISA security code assigned in [512] DISA Security
Code before making an outside (CO) line call.
All Security: Requires the caller to enter a DISA security code before making either an outside (CO)
line or intercom call.
No Security: Allows the caller to make either an outside (CO) line or intercom call without entering a
DISA security code.
NEXT SELECT STORE
(10/ 20/30/
40/60/120 s)
NEXT SELECT STORE
( Intercept/
Disconnect)
NEXT SELECT STORE
( Trunk/All/
None Security)
2.2 PT Programming—Procedures
END
END
END
Programming Manual 51