Chapter 5 - Alarms; Configure Alarms - Toshiba Strata CTX Insight CTX Supervizor's Manual

Alarms
An on-screen alarm log is created to trace all the events causing an alarm. This log can
be filtered for each individual or group to present only information needed by the user.
The user's alarm window can be viewed in a monitor or browse mode. In the monitor
mode, only current alarms are shown. In the Browse mode, past and current alarms
can be viewed.

Configure Alarms

You must first configure the alarms for each set of CO lines, DID lines and for any
extensions or agents for whom you wish to set alarm thresholds.
1. From the Main Menu, click
Setup > Alarms. The Alarms
Configuration screen displays
(shown right).
2. From Alarms Configuration,
choose the appropriate button
and check Audible Alarms if
applicable.
Audible alarms require a
SoundBlaster compatible card
installed in the PC with associated multimedia drivers.
Insight CTX Supervisor Guide 04/03
5
73