Text-In Search; Figure 53 : Text-In Search Screen - Speco D24GS Operation Instruction Manual

Operation Instruction
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside Sensitivity and press the
(high sensitivity).
Highlight the box beside Min. Blocks and press the
that must be activated. Setting the Min Blocks will only be available if Motion Search is selected.
Once you set your desired search conditions, highlight Search and press the
the Motion Search screen. Selecting Cancel exits the screen without saving the changes.
When you search for motion events of another camera, you will be asked whether or not you want to delete the previous
search results from the list.

Text-In Search

The DVR maintains a log of each time there is Text Input. The Text-In Search screen displays this list. Use the arrow
buttons to highlight the event for which you would like to see video.
Pressing the button will extract the video associated with the Text Input and display the first image of the event.
Pressing the (Play/Pause) button on the Record Table Search screen will start playing the "event" video segment.
Pressing the
PLAY/STOP
NOTE: It is possible that no recorded image displays on the current screen. Press the
the screen mode to 4x4. You will be able to easily see the camera have recorded video during target time.
Text Input information will be overlaid on the image while the recorded video is played at regular speed.
You can also narrow your event search by selecting the Option... button and setting up the new search condition.
78

Figure 53 : Text-In Search screen.

button returns to live monitoring .
button. You will be able to select from 1 (low sensitivity) to 5
button. You will be able to set the number of sensor blocks
button to display the search results in
button and change
MODE