Rtsp; Figure 28 : Network - Rtsp Setup Screen - Speco D24GS Operation Instruction Manual

NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will
not be saved.
When entering no name or a name already registered on the DVRNS server, an error message displays.
Highlighting Save and pressing the
display the help desk information of the DVRNS server in the box beside Help Desk.

RTSP

Highlight RTSP and press the
Highlight Enable RTSP (Real-Time Streaming Protocol) and press the
will be able to change the settings if Enable RTSP is enabled.
Highlight the box beside RTSP Port and press the
your system administrator.
Highlight the box beside RTP Start Port and press the
from your system administrator.
Highlight the box beside RTP End Port and press the
from your system administrator.
Highlight Use Mobile and press the
DVR using a Blackberry or other mobile devices.
NOTE: Selecting Use Mobile sets the Speco Remote service to be enabled automatically regardless of Speco
Remote settings.
When using NAT (Network Address Translation) or firewall services, opening all UDP ports allows you
to access a DVR using Blackberry and Android devices.
You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter "rtsp://ID:Password@IP
address:RTSP port number/track ID='channel number'", or start Internet Explorer on your Blackberry
or other mobile devices and enter "http://IP address:Speco Remote port number/".
Some media players might play video properly depending on network conditions.
RTSP service might not be supported, depending on the type of media player.
button registers the DVR on the DVRNS server. Proper DVRNS settings will
button. The RTSP setup screen displays.
Figure 28 : Network – RTSP setup screen.
button. Set the port number of the RTSP server obtained from
button. Set the start port number of the RTP server obtained
button. Set the end port number of the RTP server obtained
button to toggle between On and Off. When set to on, you can access a remote
Digital Video Recorder
button to toggle between On and Off. You
43