Camera Menu - Speco D24GS Operation Instruction Manual

Alarm
Selecting (Alarm) in the Live Monitoring menu resets the DVR's outputs including the internal buzzer during an
alarm. It is the same as pressing the
Digital Deterrent
Selecting (Digital Deterrent) in the Live Monitoring menu displays the following setup screen and allows the DVR
to play manually.
Highlight the box beside Source name and press the
plays the selected file as the digital deterrent.
Panic
Selecting (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting
panic recording.
Sequence
Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the same as
pressing the button. When in one of the multi-view formats, selecting
SEQ
screen layouts (Full Sequence). Or, the bottom, right screen will display live cameras sequentially (Cameo Sequence).
For example, if you select
< Full Sequence >
NOTE: The sequence display mode between Local Camera and Network Camera repeats. For example, if you
select in the 2x2 format when displaying local cameras 13 to 16 the next screen will be network cameras 1
to 4, and selecting
Selecting again in the Live Monitoring menu exits the Sequence mode. While in the Sequence mode, the
displays in bottom-left corner if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a
page are Off, or have lost video or are set to Covert (unless the user has authority to view covert cameras), that page
will be excluded from the sequence.
NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence
monitoring should be selected in the Display setup screen (Primary Monitor tab).

Camera Menu

 PTZ: Selecting (Camera Menu) → PTZ and choosing the camera number allows you to control the selected
camera as long as it has Pan, Tilt and Zoom capabilities. It is the same as pressing the
following PTZ Mode section for details.
 Zoom: Selecting (Camera Menu) → Zoom and choosing the camera number zooms the current image of the
selected camera on the screen. Refer to the following Zoom Mode section for details.
 Audio: Selecting (Camera Menu) → Audio toggles audio output On and Off.
 Mic: Selecting (Camera Menu) → Mic toggles the DVR's audio that is sent to the network device On and Off.
 Color Control: Selecting
control brightness, contrast, hue and saturation for each camera for the selected camera if a user who has Color Control
authority logs into the system. It is the same as pressing and holding a camera button for a few seconds.
button.
ALARM
button to select the source file to play. Highlighting Trigger
in the 2x2 format, the DVR changes pages as follows:
when displaying network cameras 13 to 16 the next screen will be local cameras 1 to 4.
(Camera Menu) → Color Control and choosing the camera number allows you to
Digital Video Recorder
will cause the DVR to go through predefined
< Cameo Sequence >
button. Refer to the
PTZ
again stops
icon
65