Notification; Figure 29 : Network - Notification Setup Screen - Speco D24GS Operation Instruction Manual

Operation Instruction

Notification

Highlight Notification and press the
You can add and edit notification schedules. Highlight the + and press the
the boxes under the Column heading and pressing the
The Day box allows you to select the days that the notification schedule will be active. The choices are: Sun, Mon,
Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the notification schedule will be active in 15-minute increments from
00:00 to 24:00.
Highlight the desired box under the Notify heading, and press the
Highlight the box beside Summary Email Interval and select the interval that you want the DVR to send a summary
email. The DVR will send an email containing a summary of events detected during the preset interval.
Highlight Callback – Setup and press the
a computer running Speco Central (Remote Administration System) when an event occurs.
44
button. The Notification setup screen displays.
Figure 29 : Network – Notification setup screen.
button allows you to edit the information in those boxes.
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled
in the Notification setup screen and the DVR should be registered
in the Speco Central (Remote Administration System).
button, and the Callback screen appears. The DVR can be set up to contact
Highlight the box under the No. heading and press the
and Off. You will only be able to change the IP addresses if No. is enabled.
Highlight the IP Address box that you want to change and press the
the arrow buttons to enter the IP address of the computer you want contacted during an
event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR
to try contacting the computer. You can select from 1 to 10 retries.
button to add a schedule. Highlighting
button. The Schedule Notify menu appears.
button. Highlight OK and press
button to toggle between On
button. Use