Text-In Search - Speco CS Series Manual

POS Manual
On and Off.
NOTE: If Any Character is turned On, you will not be able to enter any text in the
Transaction Start box.
Highlight the box beside Transaction End, and press the button. Use the virtual keyboard
to enter the Transaction End string. Refer to the device manufacturer's documentation for the
text string that the device sends when a transaction ends.
Highlight the more line(s) box, and press the button. Select the number of additional lines of
text that you want the DVR to record. You can choose from 0 to 10.
Highlight the box beside Line Delimiter, and press the button. Use the virtual keyboard to
enter the character(s) that the device uses to indicate the end of a line. Special characters can be
created using ^ and a capital letter; e.g., ^J for NL (New Line), ^M for CR (Carriage Return).
Refer to the device manufacturer's documentation for Line Delimiter character(s).
Highlight the box beside Ignore String, and press the button. Use the virtual keyboard to enter
any strings of text that you want the DVR to ignore. Refer to the device manufacturer's
documentation for text strings that the device sends during transactions, so you will know which
ones you do not want recorded.
Highlight the Case Sensitive box, and press the button to toggle between On and Off. Refer to
the device manufacturer's documentation to determine if the text strings are Case Sensitive. If
the device distinguishes between upper and lower case letters, make certain the Case Sensitive
box is turned On.
Highlight the box beside Time Out, and press the
button. Set the length of time to wait for the
new text string. The DVR will consider a transaction complete if no new text strings are entered
between the last text input and the dwell time out. You can adjust the Time Out dwell from 5
seconds to 15 minutes.
Highlighting the box under the Actions and pressing the button. The DVR can be set to react
to text input. Text input can be associated with cameras, trigger an Alarm-Out connector, sound
the DVR's internal buzzer, notify a number of different devices, move PTZ cameras to preset
positions, and/or display a camera on a SPOT monitor.
8