Text-In; Figure 22 : Event - Text-In Setup Screen - Speco D24GS Operation Instruction Manual

Operation Instruction
You can turn individual cameras On or Off for video blind detection by highlighting the camera number and pressing the
button.
NOTE: Video blind might NOT be detected for a camera with a very noisy image especially when set for low
sensitivity values.
Highlighting the box under the Activation Time heading allows you to set the duration before the DVR will report a
Video Blind. The DVR will not consider any blinded camera to be a Video Blind if the detected blindness is less than
the Activation Time set on this screen.
Highlight the box under the Actions and press the
for each camera. Each camera can be associated with another camera, trigger an Alarm-Out connector, sound the DVR's
internal buzzer, notify a number of different devices, move PTZ cameras to preset positions, and/or display a camera
on a SPOT monitor.
Highlight Use Ignoring Time and press the
ignore video blind events occurred during the preset period. Highlighting Time Setup and press the
you to set up event ignoring time.

Text-In

Highlight Text-In and press the
The DVR can be set to react to text input from devices such as ATMs (Automated Teller Machines) and POS (Point
of Sale; i.e., cash registers). This screen allows you to configure the DVR for each text-in device.
Highlight the box under the Setup heading, and press the
parameters excluding Port settings of all the text input channels.
NOTE: The system performance might be affected when a large quantity of text inputs are detected from several
channels at the same time.
36
Highlighting the box under the Sensitivity heading
allows you to adjust the DVR's sensitivity to video blind
from 1 (least sensitive) to 10 (most sensitive).
button. The DVR can be set to react to video blind differently
button to toggle between On and Off. When set to On, the DVR will
button, and the Text-In setup screen appears. (Local Cameras Only)
Figure 22 : Event – Text-In setup screen.
button. Selecting the Setup heading changes all the
button allows