4 channel hdcctv digital video recorder (93 pages)
Summary of Contents for Speco DVR-4TH
Page 1
® DVR-4TH DVR-8TH DVR-16TH Digital Video Recorder Family With Network/DDNS Video Server User’s Manual 1-800-645-5516 200 New Highway Amityville, NY 11701 www.specotech.com DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 2
User’s Manual DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 3
(servicing) instructions in the literature accompanying the appliance. This symbol intends to alert the user to the presence of unprotected “Dangerous Voltage” within the product’s enclosure that may be strong enough to cause a risk of electric shock. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 4
The maximum temperature for rack-mounted units is 104 °F/40 °C. Check product label for power supply requirements to assure that no overloading of supply circuits or over current protection occurs. Main grounding must be reliable and uncompromised by any connections. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Day/ Night Time Start ................35 Day/ Night Time End ................35 Weekend Schedule .................35 Weekend Start/ End ................35 3.7.3 Preset Record Configuration..............35 3.7.4 Per Camera Configuration ..............36 3.7.5 Record Event Video Only................36 4. Basic Operation ......................37 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 6
2-Way Audio Talk Function ................56 UPnP Function....................56 4.8.1 Setting Up the DVR and the PC..............57 4.8.2 UPnP NAT Traversal Function ..............57 5. Advanced System Configuration ................58 Username and Password ...................58 Key Usage in OSD setup menu..................59 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 7
Account Setup.................67 5.1.6.3 Authority Setup ...............68 5.1.6.4 Load Default Setting ...............68 5.1.7 Network Setup ..................69 5.1.7.1 LAN Select ................69 5.1.7.2 LAN Setup................70 DHCP..................70 IP ....................70 Netmask..................71 Gateway..................71 DNS ..................71 PPPoE Account...............71 PPPoE Password..............72 PPPoE Max Idle..............72 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 8
Audio Output ................86 5.1.9.2 Key Beep ................86 5.1.10 IP Camera Support................86 Monitor Setup ....................87 5.2.1 Show Camera Title..................87 5.2.2 Title Position....................87 5.2.3 Monitor Brightness ..................88 5.2.4 Monitor Contrast ..................88 5.2.5 Monitor Chrominance................88 5.2.6 Screen Center Adjust ................88 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 9
IP Dome Protocol..............95 5.3.2.6 Device Setup................95 Product ID ................96 Image Resolution/ FPS/ Compression/ Quality .......96 Sharpness/ Brightness/ Contrast/ Saturation/Hue....96 Apply..................97 5.3.2.7 Activated .................97 5.3.2.8 Status ..................97 Record Setup.....................98 5.4.1 Record Mode Setup ................98 5.4.1.1 Record Resolution ..............98 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 11
5.9.4 Select Events ..................121 5.9.5 Data Type....................121 5.9.6 Digital Signature..................122 5.9.7 Erase Disc.....................122 5.9.8 Begin Export ..................122 5.10 Text Setup......................123 5.10.1 Text Function..................123 5.10.2 Text Overlay ..................123 5.10.3 Exception Text Setup................124 5.10.3.1 Exception No.................124 5.10.3.2 Trigger...................124 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 12
6.3.6 Take a Snapshot ...................139 6.3.7 Remote Monitoring Software Trouble Shooting Guide ......140 Appendix A: Technical Specifications .................141 Appendix B: Preset Record Configuration ..............143 Appendix C: Record Duration..................145 Appendix D: Dial-up Connections via Modem ............147 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 13
Appendix G: HDD PC Player Tool Introduction ............161 Using EXT2IFS on Your PC..................161 Start Playing the *.drv file..................163 Appendix H: IR Remote ....................165 Appendix I: ezRecord Diagram Sample ...............167 Appendix J: Connect to External Storage Device............170 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Overview The DVR-4TH/ 8TH/ 16TH series unit is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security CCTV solution. Its outstanding pentaplex operation enables users to view live or playback...
DVR-16TH Product Key Features The DVR-4TH/ 8TH/ 16TH series offers advanced features not typically found in standard multiplexers. It integrates the full features of a DVR, a multiplexer and a video server (by using the software SpecoRemote™). The key features of the DVR-4TH/ 8TH/ 16TH series are listed as follows.
• Powerful alarm processor allows flexible alarm trigger and responses, including alarm, motion, and camera failure • Dome control protocols: Speco, Pelco D, Pelco P, Fastrax 2, AD422, Panasonic_C, Panasonic_N, DSCP and JVC • 8 levels of password security Product Application Diagram According to system demand, connect the unit with selective devices as shown in the system diagram below to complete a video surveillance solution.
Selecting Video Format The DVR-4TH/ 8TH/ 16TH series unit is designed to operate under either NTSC or PAL video formats. Please contact a qualified service person to perform the installation procedure.
If you plan to install any short-term external devices, such as USB DVD+RW, USB Hard Disk Drive, etc, to the DVR-4TH/ 8TH/ 16TH series and want to use them as part of the unit system, make sure those devices are connected only after the DVR-4TH/ 8TH/ 16TH is powered up.
Page 19
A group of BNC connectors is provided for video input streams from installed cameras. The number of connectors equals to the number of channels. The DVR-4TH/ 8TH/ 16TH series unit has 4/ 8/ 16 BNC connectors on the rear panel, respectively.
Page 20
User’s Manual Audio In The DVR-4TH/ 8TH/ 16TH series unit provides 4/ 8/ 16 channels of audio recording accordingly. The Audio In connectors are offered for connecting audio source devices (e.g. external amplified microphone) to the unit. The PIN of upper row is for input of each channel while the lower row is for ground.
The functional keys on the unit’s front panel enable users to control the unit and preset programmable settings. 3.1.1 LED Definition The LED indication lights of the DVR-4TH/ 8TH/ 16TH series unit on the front panel are described as follows. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The LED should be lit when an alarm is triggered. Network LED The LED should be lit when the DVR-4TH/ 8TH/ 16TH series unit is connected to a network and it should blink when any data is being transferred. REC LED The LED should blink while the DVR-4TH/ 8TH/ 16TH series unit is recording.
Page 23
DOME. Once users lock up the function of these keys, enter proper username and password to gain access of the functions of these keys. NOTE: Please go to the <System Setup> <User Management> menu to enable or disable the password protection. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 24
Press this key to access the OSD setup menu. SEARCH In both Playback and Live mode, press SEARCH to access the Search menu to search and playback recorded video by date/ time, events, or text. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The OSD setup menu is a hierarchical list of items for configuring the DVR-4TH/ 8TH/ 16TH series unit. Collaborating with a USB mouse, setting up the DVR can be easy as operating on a PC. Press MENU and input a valid username.
5 minutes at Live/ Menu mode. 3.2.1 User Management The DVR-4TH/ 8TH/ 16TH series unit provides the option to create up to seven sets of usernames and passwords with customized authority, excluding the preset “admin” account. From the Main Menu, select <System Setup>...
- After the HDD is formatted, select <Add> to add it into the database. Some recommended HDDs are listed as below: SV35.2 160G / 320G Seagate Barracuda ES.2 500G Barracuda 7200.11 1000G Hitachi DeskStar 320G Maxtor DiamondMax 22 500G Western Digital WD AV 160G / 320G / 500G DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Power On/ Off the Unit If the DVR-4TH/ 8TH/ 16TH series unit must be shutdown for any reason, always remember to follow proper shutdown and power on procedures in order to avoid damage to the unit. To Power On the Unit First check if the type of power source available is compatible before plugging into the unit.
This function allows user to set the OSD display type of the date/ time. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DST Bias <DST Bias> allows the user to set the amount of time to move forward from the standard time for daylight saving time. The available options are <30>, <60>, <90> and <120> minutes. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
ON, time sync will be performed every hour in order to observe correct time of your local zone. NOTE: If you want the unit to automatically synchronize the local time, the <Time Zone> item MUST NOT be set to <OFF>, or the function cannot be activated. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Access this item to enter the name of the IP camera to be shown on the monitor. Hostname/IP Access this item to enter the hostname or IP address of the IP camera, for example 192.168.1.123. Model Access this item to select the model of the connected IP camera. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Access this item to select the streaming protocol of the IP camera. The option includes <RTP+RTSP>, <RTP/RTSP>, <RTP/RTSP/HTTP>, and <HTTP>. NOTE: Please contact manufacturer of the IP camera for assistance if the IP camera’s Management Port / Streaming Port / Streaming Format / Streaming Protocol are unknown. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The menu will be shown as below. Status 1. Model **** 2. Streaming Format MPEG4 3. Resolution 640x480 4. PPS 5. Bandwidth 20 KB/Sec 6. Pkg. lost rate 0.1% The information shown on the monitor is “read only”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Schedule Setup 1. Day Time Start 06:00 2. Day Time End 18:00 3. Night Time Start 18:00 4. Night Time End 06:00 5. Weekend Schedule 6. Weekend Start Fri PM18:00 7. Weekend End AM 06:00 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
<Best Quality>, the default. Please refer to appendix Record Configuration for tables showing the PPS and picture size under various setting. For further information about setting up the configuration, please refer to section Preset Record Configuration. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Enter the OSD setup menu with a proper account. • In the OSD setup menu, select <Record Setup> menu. Move the cursor to the item <Preset Config>, and select <Event only>. Refer to section Preset Record Configuration for more detailed information. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Basic Operation The DVR-4TH/ 8TH/ 16TH series unit allows the user to easily access some general operations through the front panel. The following sections introduce the general operation of the unit. Viewing Live/ Playback Video The general functions in live and playback mode are described in the sections that follow.
Search menu to play specific video. Refer to section Searching Recorded Video for more information. The Forward or Backward playing speed indicator will be shown on the bottom-left of the screen in Playback mode. General operation for Playback mode is described as follows. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Press and hold LEFT/ RIGHT keys to move backward/ forward the video single steps continuously. • Press FREEZE again to resume the playback operation. NOTE: Single step backward is available in JPEG recording only. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
4.2.2 Call Monitor Control Users can use front panel of the DVR-4TH/ 8TH/ 16TH series unit to control a call monitor display without having to access the Main menu. Two viewing modes can be displayed on call monitor: Sequence display and Single camera display.
User’s Manual Searching Recorded Video The DVR-4TH/ 8TH/ 16TH series unit is capable of searching and playing back recorded video by date/ time, events, or text. In live or playback mode, press SEARCH to enter the Search menu, which is shown as follows.
Follow these steps to playback selected event video from the Event List. • Press and hold UP/ DOWN to scroll through the Event List. • Press ENTER to playback the selected event video. • Press PLAY/ STOP to return to live mode. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Greater Equal Than: Enter one number. Search for videos with data containing number(s) greater than or equal to the specific number. • Specific: Specify a number. Search for videos with data containing the specific number. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
1.5 GB The DVR-4TH/ 8TH/ 16TH series unit only supports EXT3 file system. If an external HDD will be connected to the unit, ensure the format of the HDD is EXT3. If not, please format this HDD to EXT3 first.
Make sure that an external storage device, such as a USB Hard Drive or USB ® ThumbDrive , is available and connected to the appropriate port for export. For more information about verifying a digital signature, see appendix Verifying Digital Signature. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The whole exporting process is done through the front panel operation, but no need to access the OSD setup menu. The ezBurn export process is illustrated as the following: The process is described step by step in the following sections. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Press SEARCH and playback desired event video. For details on how to playback event video, refer to section Searching by Event. • When the playback starts, press COPY. The “ezBurn” window will be displayed as follows. The information shown on the window is “read only”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Select this item to delete all normal and event videos from the database. Purge All Event Data Select this item to delete all event videos from the database. Purge Event Before This item is for deleting event videos that are recorded before a specific date. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Dome Control The DVR-4TH/ 8TH/ 16TH series unit allows the user to control a dome camera via the front panel. In Live mode, users can press a CHANNEL key to display the corresponding dome camera in full screen. To enter Dome Control mode, press the DOME key and the hint screen will be displayed.
Dome Protocol Setup The Dome Protocol item lists the dome protocols available for communicating with dome cameras connected to the DVR-4TH/ 8TH/ 16TH series unit. From the Main menu, select <Camera Setup> and press ENTER. The following menu is displayed.
ID address, or a conflict may occur. The default RS-485 settings of the DVR-4TH/ 8TH/ 16TH series unit are 9600 Baud, 8 Data Bits, 1 Stop Bit, and No Parity.
• In OSD setup menu, these keys function as direction keys. • In dome control mode, press these keys to pan and tilt the lens of dome camera. Press this key to leave dome control mode and return to live mode. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
4.6.5 Setting Preset Points The DVR-4TH/ 8TH/ 16TH series unit allows users to set preset positions. The maximum amount of preset points allowed depends on the brand and model of the dome camera.
• Use UP / DOWN keys to select the desired preset number from the menu. • Change the <Go Preset> of the selected preset number to <Yes>, and press ENTER to call the preset position. • Now the dome camera automatically rotates to the called preset position. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DVR in the same local area network. The advantage of this function is that PCs can connect to the DVR via the remote control software by directly clicking on the icon representing the DVR in <My Network Places> folder. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Fortunately, if the DVR has UPnP NAT traversal function, the setting of the router will be done automatically when it is enabled. Just select <Yes> for the menu item UPnP NAT Traversal in the UPnP setup menu and it will take care of everything. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Advanced System Configuration The detailed functions and settings of the DVR-4TH/ 8TH/ 16TH series unit can be set by using the hierarchical OSD setup menu. Collaborating with a USB mouse, setting up the DVR can be easy as operating on a PC. This chapter describes the menu items and options in the OSD setup menu.
UP / DOWN are used to change the value in the selected field. <ENTER> In OSD setup menu or selection interface, press this key to select or save settings. <ESC> Press to cancel or exit from certain OSD setup menu without saving any changes. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Select <OK> and press ENTER to save the settings and exit, or press ESC to exit without saving changes. NOTE: If a USB keyboard is connected and when any key on the keyboard is pressed, the cursor on the virtual keyboard will be automatically moved to “OK”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The items in this menu are described in the following subsections. 5.1.1.1 DVR System Information & Version Numbers The first seven items listed DVR system information and version numbers of hardware and software. These information is “read only”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual 5.1.1.2 Software Upgrade via Local Device This item is used for updating the DVR-4TH/ 8TH/ 16TH series unit software by local device. The menu is displayed as follows. Software Upgrade via Local Device Upgrade Version Select xxxx-xxxx-xxxx-xxxx Connect a USB drive that contains the upgrade software to the unit; the upgrade files that are available will then be listed in the menu.
Select <Date> or <Time> and press ENTER to adjust the settings. LEFT / RIGHT keys are used to move the cursor to previous or next field, ENTER is for selecting, and UP / DOWN are used to change the value in the selected field. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”. Use UP / DOWN keys to change the setting. The default setting is <Y/M/D> in both NTSC / PAL formats. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The submenu allows you to setup the Network Time Protocol (NTP) server, to automatically synchronize your unit to fit the local time per hour, and to manually synchronize the local time. Network Time Protocol Setup 1. NTP Server Time.nist.gov 2. Automatically Time Sync 3. Manually Time Sync DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Select <ON> to instantly synchronize the local time. 5.1.4 Unit Name Users are allowed to assign a name, up to 11 characters, to the DVR-4TH/ 8TH/ 16TH series unit. Follow the steps below to edit the unit name. • Select <Unit Name> from System Setup menu and press ENTER. A virtual keyboard displays.
User’s Manual 5.1.5 Show Unit Name Select <Yes> to show the DVR-4TH/ 8TH/ 16TH series unit name on the monitor or <No> hide the unit name. 5.1.6 User Management The DVR provides the option to create up to seven sets of usernames and passwords with customized authority, excluding the preset “admin”...
When the account does not have authority to access certain functions, an error message will be displayed on the screen. 5.1.6.4 Load Default Setting This item is for restoring the default settings. Select <Yes> to load default setting or select <No> to exit. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DSL Line or cable modem, please select <PPPoE>. If <None> is selected, then there is no need to set further LAN setting, therefore, the second item <LAN Setup> will not be accessible. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
If the DHCP is enabled (ON), a dynamic IP will be assigned to the DVR-4TH/ 8TH/ 16TH series unit. In this case, the user does not need to configure a static IP or the Ethernet settings including IP address, Netmask, Gateway, and DNS settings will be “read only”.
This network search continues until it times out. PPPoE Account This item allows the user to setup the PPPoE login username. NOTE: For accessing the PPPoE settings, select <PPPoE> as the Network Type in Network Setup menu. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
PC. You can select the idle time from 0 to 600 minutes. The default is 35 minutes. Connect At Booting The unit can connect to the Internet automatically when powered up. Select <YES> to connect at booting, otherwise select <NO>. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The Dial-in function enables the user to establish dial-up modem communication to and from the DVR-4TH/ 8TH/ 16TH series unit for remote software use. The user is allowed to connect only one modem to a DVR-4TH/ 8TH/ 16TH series unit.
Page 75
0 Min Dial-in Service If the DVR-4TH/ 8TH/ 16TH series unit does not connect to the Internet, the user can communicate to the unit from a remote PC through a modem as well. Select <ON> to enable the Dial-in function, or <OFF> to disable.
Page 76
• When done, move the cursor to <OK> and press ENTER to save the settings and exit. Server IP This item is for setting the IP address that identifies the DVR-4TH/ 8TH/ 16TH series unit over a modem connection. To set the server IP, follow these steps: • Select <Server IP>.
This item allows the user to obtain a dynamic IP address from a DHCP (Dynamic Host Configuration Protocol) server over a modem connection. If the item is enabled (ON), a dynamic IP will be assigned to the DVR-4TH/ 8TH/ 16THseries unit. In this case, the user does not need to configure a static IP and the following settings will be “read only.”...
Page 78
User’s Manual Dial-out Netmask This item is for setting the Netmask that identifies the DVR-4TH/ 8TH/ 16TH series unit over a modem connection. To configure the item, DHCP must be set to <OFF>. Move the cursor over <Dial-out Netmask> and press ENTER, and then press UP / DOWN keys to change the values in the selected field.
Page 79
Dial-out Max Time This item indicates the longest amount of time that the connection via modem remains active. The value can be set from 1 min to 600 min, or <0> to keep the connection indefinitely. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Serial Port of the DVR, enter the Dial Port Selection menu and assign Dial-In/Out to the Serial Port, the DVR-4TH/ 8TH/ 16TH series unit will now be able to use the modem to connect to the internet.
Select <YES> to send e-mail via SMTP using direction keys; if not, select <NO>. SMTP Server This item enables the user to set the SMTP server. Contact your network service provider for more specific information. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Use Direction keys to move the cursor for selecting character. • Press ENTER to add the selected character to the SMTP Account entry field. • When done, move the cursor to <OK> and press ENTER to save the settings and exit. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Once the setting is completed, the DDNS address will be: http://yourhostname.ddns.specoddns.net Fore example, if the chosen Host name is “SPECO”, then the address will be: http://speco.ddns.specoddns.net Select <DDNS Setup> from Network Setup and press ENTER. The menu displays as below figure.
• Press ENTER to add the selected character to the Host Name entry field. • When done, move the cursor to <OK> and press ENTER to save the settings and exit. NOTE: No any two DVR-4TH/ 8TH/ 16TH series units should be set to the same Host Name. DDNS Port This item allows the user to setup the port for DDNS.
Universal Plug and Play (UPnP) integrates a universal protocol for widespread plug-and-play devices to ease the network implementation. When a PC and the DVR-4TH/ 8TH/ 16TH series unit both installed the UPnP function, the PC can automatically recognize the DVR-4TH/ 8TH/ 16TH series unit in the same local area network.
<ODD>, <EVEN>, and <NONE>. The default is <NONE>. 5.1.9 Audio Output/ Key Beep Enter this menu to setup the audio output or key beep. Audio Output/ Key Beep 1. Audio Output Live/PB 2. Key Beep DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DVR must reboot to apply the change ENTER: Yes ESC: No NOTE: 1. The existing database will NOT be re-formatted after switching to this function. 2. Alarm I/O, Motion detection function, and audio of the IP camera are NOT currently supported DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
CRT CCTV monitor, set this item to <Fit BNC>; or set this item to <Fit VGA> for PC monitor. After switching to CH10 CH11 CH12 CH10 CH11 CH12 <Fit VGA> mode. CH13 CH14 CH15 CH16 CH13 CH14 CH15 CH16 <Wrong Setting> <Correct Setting> DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Select <Screen Center Adjust> from the Monitor Setup menu and press ENTER. The adjusting screen displays as follows. Screen Center Adjust ▲ ◄ ► ▼ • Position the screen center position using the Direction keys. • Press ENTER to exit when finished. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Choose this item to display a color bar pattern on the screen. The color bar helps to adjust the monitor hue, saturation, text color, and display options. Press ESC to exit the color bar pattern and return to the OSD menu. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
UP / DOWN keys. 5.3.1.2 Dome Protocol Select the communications protocol associated with your dome camera using the ENTER and Direction keys. The available protocol includes <Speco>, <DSCP>, <AD422>, <Pelco D>, <Pelco P>, <Fastrax 2>, <JVC>, <Panasonic_C>, <Panasonic_N> and <None> (default). 5.3.1.3 Dome ID This item is used to assign an ID number to the selected dome camera.
To set a camera to be covert, follow these steps: • Select the channel that you want to be covert from the <Channel Select> item. • After selecting the channel, move the cursor to Covert> item and select <Yes>. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
ENTER, then select <Yes> to set up the connection. Alternatively, select <No> to disable the connection. 5.3.2 IP Camera If you are using an IP camera, please continue with this section. Items in this menu are described in the following subsections. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Use Direction keys to select character. • Press ENTER to add the selected character to the entry field. • When it’s done, move the cursor to <OK> and press ENTER to save the settings and exit. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
5.3.2.4 Model Enter this item to select matching model of the IP camera. The DVR supports the following IP camera models: <Speco SIP Cameras>, <NH Series>, <ACTi Series>, <SONY SNC>, <AXIS 200>, <ViVoTek 7000>, <D7521>, <HUNT>, <SANYO>, and <LUXON>. 5.3.2.5 Connection Setup This item allows users to setup the connection of the IP camera.
If the connection cannot be detected, the following message will be displayed. Please check the <Hostname/IP>, <Model>, and <Connection Setup> again to make sure the settings are correct. Cannot get config from the IP device DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Second)/ Compression/ Quality of the IP camera. Sharpness/ Brightness/ Contrast/ Saturation/Hue Move the cursor to the items and press ENTER to adjust the Sharpness/ Brightness/ Contrast/ Saturation/ Hue of the camera. Use UP / DOWN keys to adjust the numeric value. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The menu will be shown as below Status 1. Model **** 2. Resolution 720*480 3. PPS 4. Bandwidth 20 KB/Sec 5. Pkg. lost rate 0.1% The information shown on the monitor is “ready only”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Record Setup The following three factors will effect the total record time of the DVR-4TH/ 8TH/ 16TH series unit: • HDD capacity • Recording rate (Picture per Second) • Image quality settings The greater the recording rate and the higher the quality setting, the shorter the recording time.
Time is indicated in 1-minute increments. The time display format in this menu is based on the setting of Time Display Mode. 5.4.2.2 Weekend Schedule The Weekend Schedule determines whether a weekend schedule is in effect. Choose <YES> to take effect the related weekend settings. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The menu is displayed below is in Record mode: 352×240@120PPS in NTSC / 352×288@100PPS in PAL). Per Camera Config Cameral Select Night Weekend Normal PPS Normal Qlty Event Max PPS Event Qlty Best Best Best Event Act Both Both Both DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Normally, the Event PPS is set to be equal to or greater than Normal PPS; the setting depends on your application. If the Event PPS is set to <0>, the DVR-4TH/ 8TH/ 16TH series unit stops recording event video during alarms. 5.4.4.5 Event Qlty This item is used to set the picture size for event status recording.
The <How Many Days To Record> will be computed automatically. • Select <Average Normal Quality> and press ENTER, then press UP/DOWN to choose an option. The <How Many Days To Record> will be computed automatically. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The quality of the pre-alarm video is the same as the quality setting for normal record video; and the quality of the post-alarm video is the same as the quality setting for event record video. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Purge All Event Data This item is used to delete all event video from database(s). Using UP / DOWN keys to select <Yes> and start the deleting by setting the <Start to Purge> to <Yes>. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
This item is used to set the Main / Call Monitor camera sequence in full screen format. Move the cursor to <Main Monitor Schedule> and press ENTER; the menu is displayed as follows. Main Monitor Schedule _►_►_►_►_►_►_►_►_ ►_►_►_►_►_►_►_ Press Channel Keys To Select Channel Press ◄ Key To Delete DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
5.6.1 Internal Buzzer This item allows user to enable / disable the DVR-4TH/ 8TH/ 16TH series internal buzzer. If set to <ON>, the buzzer is activated in response to an alarm. If set to <OFF>, the buzzer is not activated. The default setting is <ON>.
Select <None> to enable this function; select <Main> to display the alarm channel on Main Monitor when an alarm is triggered; select <Call> to display the alarm channel on Call Monitor; and select <Both> to display the alarm channel on both Main Monitor and Call Monitor. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
<Night>, and <Day>. The Day, Night, and Weekend is defined in section Schedule Setup. If motion detection function is enabled, it is required to define the motion detection parameters such as detection area and sensitivity settings. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Threshold value Move the cursor to <Sensitivity> and press ENTER, and then use UP / DOWN keys to adjust the value. The value is indicated in 4% increment. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Select from the options: <A Only> indicates “Alarm Out A”, <B Only> indicates “Alarm Out B”, <A+B> indicates “A and B Alarm Out” and <None> indicates “No Alarm Out”. The default setting is <None>. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The playback continues. • Press COPY again at the point you want to set the end point of the audio. Now, the “ezBurn Confirmation” window displays as follows. The information shown on the window is “read only”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 114
Only the first 10 seconds data is used to create sound file ENTER: Yes ESC: No • Press ENTER to set the first 10 seconds audio as the Digital Deterrent file; or press ESC to abort. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
HDD in database. The information is ” read-only.” 5.7.2 Avail. Rec Time The Avail REC Time indicates the available duration for recording. If the unit is set to record in circular mode, the item will show “Circular”. The information is read-only. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The options are <None> (no action), <Add> (add the selected device into database), <Remove> (remove the selected device from database), <Format> (format the selected device), and <Repair> (renovate the selected device). NOTE: Before removing external devices from the unit, remember to remove the device from database. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Refer to the following for an example. The information is “read only”. NAS Detailed Info Device Name: xxxxxxxxxxx IP: 192.168.50.2 Port: 8080 Netmask: 255.255.255.0 Storage Status Index Status Free Size Total Size DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
“This config has different record mode. This will FORMAT ALL HARDDISKS.” will show. ® NOTE: Remove ThumbDrive used importing configuration after the unit restarts, or it will be formatted as well. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Select <Yes> to begin exporting the configuration file, or <No> to abort the export. NOTE: We strongly recommend users to export configurations before upgrading your system, and back it up routinely, just in case an unexpected situation occurs. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DVD+RW drive. Login with a proper account to export video. If the <Pre-Alarm Recording> function is enabled, the event video will be exported into two files, including pre-alarm video and video recorded after the alarm is triggered. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
256 MB xx-xxx-xx-xxxx 1.5 GB The DVR-4TH/ 8TH/ 16TH series unit only supports EXT3 file system. If you connect an external HDD to the unit, ensure that the format of HDD is EXT3. <Device Name> This item shows the name of the available device.
<Select Event>, you have to set <From> and <To> for the same day and time; otherwise, not only the selected event video will be exported to the selected destination, but also any other event video recorded during the period between <From> and <To>. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Select <Yes> and press ENTER to start deleting data. NOTE: This menu item will be grayed out when selected device is not a DVD recorder or not select yet. 5.9.8 Begin Export Select <Yes> and press ENTER to start exporting. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
<PB> to display the text overlay in Playback mode; and select <Live & PB> to display in both Live and Playback modes. NOTE: Text overlay only shown in full screen mode. NOTE: PB overlay is available only under x1 PB speed. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
<Value>, <Greater Equal Than>: That the value of transaction is greater then or equal to certain value will be marked as an exception. That specific value need to be configured through the following sub-setting <Value>, DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Meanwhile, also check whether the device is connected to the port selected. Port Selection 1. Serial Port Text 2. USB Port-Front None 3. USB Port-Rear Top None 4. USB Port-Rear Bottom None DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
5.10.4.5 Manual Filter Setup Once enter the Manual Filter Setup menu, users should key in hexadecimal digits. The menu of the item is shown as follows. Manual Filter Setup 1. Header 1 2. Header 2 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
To setup the baud rate of RS232 via which to connect your Text Device and DVR. 5.10.4.8 Text Bit To setup the bits of RS232. 5.10.4.9 Text Stop To setup the stop of RS232. 5.10.4.10 Text Parity To setup the parity of RS232 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
This item is used to shut down or reboot the unit. If you must shut down the DVR-4TH/ 8TH/ 16TH series unit for any reason, please use the proper shut down and power up procedures to avoid damage to your unit.
Windows XP, Windows Vista Web Browser Microsoft Internet Explorer version 6.0 or above Monitor Resolution Minimum 1024 x 768 with 16-bit color 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) Network Card operation; must match the network configuration DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Select <Tools> from the main menu of the browser, then <Internet Options>, and then click the <Security> tab. • Select <Trusted sites> and click <Sites> to specify its security setting. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 132
• Under <ActiveX controls and plug-ins>, set all items to <Enable> or <Prompt>. • Click <OK> to apply the setting and close the <Security Settings> screen. • Click <OK> to close Internet Options dialog. Now the installation can continue to the next step. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DVR. This process may take up to 30 seconds. • When the software is completely downloaded and installed, the Login Screen is now displayed. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 134
• If the connection is made successfully, the main window will display live video of the attached cameras. If the IE browser is closed, the remote system is logout and disconnected from the DVR at the same time. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
DVR are displayed on the main window. When a dome camera is connected and viewed in single channel full-screen mode, the dome camera control operation can be accessed. To choose desired display mode and to operate dome camera control, refer to the following sections. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Click on it and the focus of the camera will be automatically adjusted to show a clearer image. Dome ID (ID) Click for changing the dome ID and protocol. Proper authority is required to access this function. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Follow the steps to playback a video recorded by “Instant Recording”. • Click <Play> on main window toolbar and click <Local Playback> tab. • Click <Open> to choose a recorded file. • Click <OK> to start playing the recorded video. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Use up and down arrow next to the time field to change to the wanted time. • The other way to select date and time is by moving the blue sliding bar. • Click <OK> to start the playback, or click <Close> to abort. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
1. Click to play the recorded video in forward direction. Click repeatedly to select the forward Fast Forward / ⊳⊳ playback speed: 1×, 2×, 4×, 8×, 16×, or 32×. Step Forward 2. When playback is paused, click repeatedly to move forward step-by-step. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
SNAPSHOT button, it will capture the screenshot of the window that is currently showing on the screen. Each click captures one screenshot to be saved as a JPEG file on the desktop. The snapshot file will be named as “Snapshot-*”. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
• Click the <Delete Files> button in the <Temporary Internet Files> field; the <Delete Files> screen displays as below. • Check the <Delete all offline content> box and click <OK>. • Now, enter the IP address of the DVR to make the connection again. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 143
2 Level Password Monitoring, Playback, Recording, System Setup, Communication Remote Operation Dome Camera Control RS232C D-sub 9 pin female RS485 Terminal Block Speco, Pelco P, Pelco D, Fastrax2, AD422, Panasonic_C, Dome Control Protocol Panasonic_N, DSCP, and JVC DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Appendix B: Preset Record Configuration 1. The following table shows PPS per channel and picture size of normal and event mode in Full-D1 resolution for DVR-4TH/ 8TH/ 16TH series models. Record Mode: Full-D1 mode (NTSC: 720×480@30PPS) (PAL: 720×576@25PPS) Preset...
Page 145
User’s Manual 2. The following table shows PPS per channel and picture size of normal and event mode in Half-D1 resolution for DVR-4TH/ 8TH/ 16TH series models. Record Mode: Half-D1 mode (NTSC: 720×240@60PPS) (PAL: 720×288@50PPS) Preset Normal PPS Normal Quality Event Max PPS Event Quality...
Performance may vary depending on specific installations and use. Audio recording requires 8 KB per second (or 0.7 GB per day) for data storage. Please refer to our recording time calculator on the Speco website for other possible calculations. http://www.Specotech.com...
Establishing Dial-in Connection The Dial-in function enables the user to establish dial-up modem communication to and from the DVR-4TH/ 8TH/ 16TH series unit for the remote software use. Follow the description to set up your DVR and PC. DVR Configuration: •...
Page 149
User’s Manual • Set up the network connection type. Select <Connect to the Internet> and click <Next> to continue. • Select <Set up my connection manually> and click <Next> to continue. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 150
• Select <Connect using a dial-up modem> to connect to the Internet through a phone line and a modem. Click <Next> to continue. • Type the name of the connection you are creating. • Enter the phone number of the modem that is connected to the unit. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 151
User’s Manual • Enter the Username and Password that is set up in the Dial-in Setup menu. • Click <Finish> to complete the dial-in connection.. • Now the dial-in connection is established. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Establishing Dial-out Connection The Dial-out function enables the user to establish dial-up modem communication to and from the DVR-4TH/ 8TH/ 16TH series unit for remote notification use. Follow the instructions that follow to set up your DVR and PC. DVR Configuration: •...
Page 153
• Set up the network connection type. Select <Set up an advanced connection> and then <Accept incoming connections>. Click <Next> to continue. • Choose the modem device that will be used by the PC and click <Next>. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 154
• In User Permission menu, select the users that will be using this connection. If needed, add a new user with the same user password that is set up in the Dial-out Setup menu in local DVR. When done, click <Next> to continue. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 155
TCP/IP addresses automatically using DHCP>, or choose <Specify TCP/IP addresses> and enter the range of IP addresses that you wish to use. Once done, click <OK> to confirm then back to Networking Software menu. Click on <Next> to continue. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 156
User’s Manual • Click <Finish> to complete the process. • The Incoming connection is established. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
To verify the exported recorded video: Following are the procedures for digital signature verification. • Start your SpecoRemote™ and click <Play> on the main window tool bar. • Click <Verify> tab to display the Verify window. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 158
User’s Manual • Click <Browse> to select the *.gpg, *.drv, *.sig files respectively, which belong to the exported video you want to authenticate. • Click <Verify> to start verifying the digital signature. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 159
User’s Manual • The result of verification shows in the <Status Log> field. It returns a GOOD or BAD signature result. A GOOD signature indicates the exported clip has not been altered. <GOOD> Signature <BAD> Signature DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Appendix F: Alarm I/O Pin Definition The tables below list the pin definitions of alarm I/O located on the rear panel of the DVR-4TH/ 8TH/ 16TH series unit. DVR-4TH Alarm I/O Definition Definition Definition RS485 D+ Normal Close B...
Page 161
Alarm In 2 Alarm In 13 Normal Close B Alarm In 3 Alarm In 14 Common Node B Alarm In 4 Alarm In 15 Normal Open B Alarm In 5 Alarm In 16 Ground Alarm In 6 DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
The following steps guide you how to use the EXT2IFS software . Step 1. Download EXT2IFS to your PC through above website address. Step 2. Remove the HDD from your DVR-4TH/ 8TH/ 16TH series and install the removed HDD into your PC. When done, reboot the PC.
Page 163
<Save Assignments> button. Step 7. Click <Step1> sheet, and then choose <Install to System Root> and <Start drive on boot> options. When done, click <Install Drive> button. Click <Step3> sheet. Then click <Start Drive> button. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Step 2. Click the “Open Device” button (as below picture), then choose the HDD Drive that you just assigned. Figure 1: Select the Drive Step 3. After choosing the HDD Drive , choose the video file that you want to use. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Page 165
User’s Manual Step 4. Click the “Playback” to play the video directly or “Export” if you want to save the *drv file into your PC. Figure 2: Select the file you want to use DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
User’s Manual Appendix H: IR Remote An IR Remote will be included in the content box and deliver to you with your DVR-4TH/ 8TH/ 16TH series unit. The keys on the IR Remote are listed as below figure: DVR-4TH/8TH/16TH Series...
Page 167
DVR Unit ID 232 233 234 235 236 237 238 239 Remote Control # However, if you would like to escape the single DVR control mode, press “DVR SEL”, and then press “ESC” to do so. DVR-4TH/8TH/16TH Series SPECO TECHNOLOGIES 01/09...
Appendix J: Connect to External Storage Device DVR-DS4TST, with the JBOD (Linear) functionality built-in, is a Network Attached Storage System (NAS) which is specially designed for the DVR-4TH/ 8TH/ 16TH series DVR. You SHOULD NOT remove DVR’s internal HDD or shut down the DVR-DS4TST while the connection is working.