Status Setup; Event; Figure 39 : Display - Spot Monitor Setup Screen - Speco D24GS Operation Instruction Manual

Operation Instruction
Highlight the box in the Channels column and press the
Pressing the button or selecting
SEQ
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel.
Monitoring and playing back video from network devices is not supported on the SPOT monitor.

Status Setup

Event

Highlight Event and press the
56
Figure 39 : Display – Spot Monitor setup screen.
(Sequence) in the Live Monitoring menu causes the DVR to sequence cameras.
button, and the Event setup screen appears.
button.
You can define which cameras display sequentially
on the Spot Monitor when in the single-screen display
format. Highlighting the box under the Camera and
pressing the button toggles between On and Off.
You can adjust the display dwell time by highlighting
the box under the Dwell and pressing the
You can select dwell intervals ranging from 1 to 20
seconds.
button.