Network Camera; Figure 44 : Camera - Network Camera Setup Screen - Speco D24GS Operation Instruction Manual

Operation Instruction
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the button. Change
the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's instructions.

Network Camera

Highlight Network Camera and press the button, and the Network Camera setup screen appears. (Network Devices
Only)
NOTE: "Network Camera" includes both network cameras and network video transmitters.
Figure 44 : Camera – Network Camera setup screen.
Highlight the Scan... box and press the button, and the Device Scan setup screen appears.
60