Storage; Figure 40 : Status - Event Setup Screen - Speco D24GS Operation Instruction Manual

The Event Status screen displays the status of the DVR's systems and inputs. Events will be highlighted, and related
channels or events will flicker for five seconds when detected.
(Alarm-In), (Motion),
event is detected based on the settings you made in the Alarm-In, Motion, Video Loss, Video Blind and Text-In setup
screen on the Event menu.
(Check Alarm-In) and Check Recording will be highlighted when each event is detected based on the settings
you made in the Monitoring setup screen on the System menu.
Panic Record will be highlighted while the DVR is in the panic recording mode.
Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and the level of disk usage reaches
the Disk Almost Full percentage you made in the System Event setup screen on the Event menu. Disk Full will be
highlighted when the DVR is not in the Recycle mode and all available storage space has been used.
Fan Error will be highlighted when the cooling fan to the left of the power cord on the rear panel is not working for
more than four seconds.
eSATA/iSCSI Disconnected will be highlighted when the eSATA or iSCSI device is disconnected.

Storage

Highlight Storage and press the
Figure 40 : Status – Event setup screen.
(Video Loss), (Video Blind) and
button, and the Storage setup screen appears.
Digital Video Recorder
(Text-In) will be highlighted when each
57