Dvrns; Figure 27 : Network - Dvrns Setup Screen - Speco D24GS Operation Instruction Manual

Operation Instruction
Selecting ADSL (with PPPoE) allows you to set up the ADSL network.
Highlight the box beside ID and press the
connection.
Highlight the box beside Password and press the
password for ADSL connection.
NOTE: Entering the ID and Password and highlighting OK reads the current IP address of the DVR configured
by the ADSL network.
If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might change whenever
the unit is turned on.

DVRNS

Highlight DVRNS and press the
Highlight Use DVR Name Service and press the
NOTE: The DVRNS (DVR Name Service) allows the DVR to use Dynamic IP addresses for remote connection.
When this feature is On, you can access your DVR remotely using the DVR name instead of its IP address.
For the DVRNS feature, the DVR should be registered on the DVRNS server.
Highlight the box beside DVRNS Server and press the
the IP address or domain name of the DVRNS server.
NOTE: You will need to get the IP Address or domain name of the DVRNS Server from your network administrator.
You can use the domain name instead of IP address if you already set up the DNS Server when setting
up the Network – IP Address.
Highlight the box beside Port and press the
Down arrow buttons to increase or decrease the numbers.
Highlight Use NAT and press the
NOTE: When using the NAT (Network Address Translation) device, refer to the NAT manufacturer's instructions
for the proper network settings.
Highlight the box beside DVR Name and press the
DVR name to be registered on the DVRNS server.
Highlight the Check box and press the
42
button. A virtual keyboard appears allowing you to enter the ID for ADSL
button. A virtual keyboard appears allowing you to enter the
button, and the DVRNS setup screen displays.
Figure 27 : Network – DVRNS setup screen.
button to toggle between On and Off.
button. A virtual keyboard appears allowing you to enter
button. Set the port number of the DVRNS server using the Up and
button to toggle between On and Off.
button. A virtual keyboard appears allowing you to enter the
button to check whether or not the name you entered can be used.