Speco D24GS Operation Instruction Manual page 27

To export the system log information, connect the USB device to the DVR. Highlight Export... and press the
Highlight the box beside File name and press the
Selecting Export will save the log information in .txt file format on the USB device.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using fixed width fonts
will be required to read the file properly.
Highlighting Clear All Data and pressing the
wish to clear all data before the DVR erases the video data. Clear All Data will not clear the System Log.
Highlight System Shutdown and press the
or not you want to shut the system down.
Highlight EZ Setup and press the
system for basic operation.
NOTE: This EZ Setup screen can only be accessed when logged on as the admin user.
Select either EZ Record or EZ Network and select the Next button to start the selected setup.
NOTE: Selecting the Cancel button throughout the screens exits the EZ Setup without saving your changes
and returns to the System – General setup screen.
button. A virtual keyboard allows you to enter the file name.
button will clear all video data. You will be asked to verify that you
button. The Shutdown screen displays asking you to confirm whether
After selecting Shutdown and pressing the
when it is safe to disconnect power.
button. The EZ Setup screen appears and guides you through configuring the
Digital Video Recorder
button, a screen will appear telling you
button.
17