Event Log Search; Figure 50 : Event Log Search Screen - Speco D24GS Operation Instruction Manual

 Audio: Selecting (Camera Menu) → Audio toggles audio playback On and Off. Recorded audio will be played
when the DVR displays a camera with recorded audio in full screen mode.
 Show/Hide Text-In: Selecting
data on the screen if the video was recorded with text-in data.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.
 Spot Monitor: Selecting Spot Monitor allows you to select the camera you want to display on a Spot monitor.
Refer to the previous Live Monitoring – Spot Monitoring section for details.
Export
 EZ Copy: Selecting
icon displays at the bottom-left corner of the screen. Selecting EZ Copy again will set the ending point of the video
to be clip copied and displays the Clip-Copy screen. See the following Clip Copy section for details.
 Clip-Copy: Select
the following Clip Copy section for details.
 Digital Deterrent Recording: Selecting
files from recorded audio on the DVR. Refer to Chapter 3 – Configuration – Digital Deterrent section for details
 Print: Selecting (Export) → Print allows you to print a selected image. See the following Print section for details.
Data Source
Selecting (Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
searches recorded data on primary storage installed in the DVR, and selecting Archive searches archived data on secondary
storage installed in the DVR.
Exit
Selecting (Exit) in the Search menu exits the search mode and enters the live monitoring mode.

Event Log Search

The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen displays this
list. Use the arrow buttons to highlight the event for which you would like to see video.
The Event Log Search screen can also be accessed by pressing the
no determined user authority to display the Event Log Search screen, however, the event video will not be played unless
a user with Search authority logs into the system .
(Camera Menu) → Show Text-In or Hide Text-In shows or hides the text-in
(Export) → EZ Copy will set the starting point of the video to be clip copied, and the
(Export) → Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup. See
(Export) → Digital Deterrent Recording allows you to extract audio

Figure 50 : Event Log Search screen.

Digital Video Recorder
button unless there is an alarm. There is
ALARM
73