Speco D24GS Operation Instruction Manual page 31

Internet Connection
Select whether or not your DVR is connected to the Internet.
LAN Setup
Select between Auto Configuration and Manual Configuration for network configuration, and then select the Test
button to test the network configuration you selected.
NOTE: Selecting Auto Configuration allows the DVR to automatically obtain LAN parameters (IP address, Gateway,
Subnet Mask and DNS Server address). Selecting Manual Configuration allows you to set up LAN
parameters manually.
The network configuration you set should be tested by selecting Test, otherwise the Next button will
cannot be selected, and you cannot move to the next step.
 Use DSL/PPPoE Setup: Selecting the box allows you to set up the DSL network. Entering the ID and password
for DSL connection is required.
DVRNS Setup
 Use DVR Name Service: Select the box to use the DVR Name Service.
 DVRNS Server: Enter the IP address or domain name of the DVRNS server.
 Port: Set the port number of the DVRNS server.
 Use NAT: Select the box to use the NAT (Network Address Translation) device.
 DVR Name: Enter the DVR name to be registered on the DVRNS server.
 Check: Select the box to check whether or not the name you entered can be used.
Digital Video Recorder
21