Speco D24GS Operation Instruction Manual page 72

Digital video recorder 8 & 16-channel + 16 ip
Table of Contents

Advertisement

Operation Instruction
Highlighting the box beside Stream Protocol and pressing the
Highlighting the box beside Record Protocol and pressing the
Highlighting the box beside ONVIF Profile and pressing the
Highlighting the Port Number Setup... box and pressing the
number and the RTSP server's port number.
Highlight Authentication and press the
information is required to change the device settings.
Highlight Use Audio Recording and press the
record audio from the device when the video from the network device is recording.
Highlight the Device Remote Setup box and press the
Appendix – Remote Setup of Network Devices for details.
NOTE: When the device's settings have been changed through the tool provided by the device manufacturer,
registering the device to the DVR again might be required for the proper operation. Refer to the device
manufacturer's instructions for proper settings.
62
Highlight Enable and press the
When it is On, you will be able to change the device settings.
Highlight the box beside Name and press the
appears allowing you to edit the device name.
You can assign IDs to each camera by highlighting the box beside Camera
ID and pressing the
button. Change the number by highlighting it and using
the Up and Down arrow buttons to increase and decrease the number. (4-ch
Network Video Transmitter Only)
Highlighting the box beside Address and pressing the
to change the IP address of the device.
Highlight the box beside User/Password and press the
keyboard appears allowing you to enter the user ID and password used when
changing device settings.
button allows you to select the protocol for streaming.
button allows you to select the protocol for recording.
button allows you to select a preset ONVIF
button allows you to select the HTTP server's port
button. An Authentication screen appears, and entering Authentication
button to toggle between On and Off. When it is On, the DVR will
button. The Device Remote Setup screen appears. See
button to toggle between On and Off.
button. A virtual keyboard
button allows you
button. A virtual
TM
profile.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D32gsD24psD32ps

Table of Contents