Alarm-Out; Figure 34 : Device - Alarm-Out Setup Screen - Speco D24GS Operation Instruction Manual

Digital Video Recorder

Alarm-Out

Highlight Alarm-Out and press the button. The Alarm-Out screen allows you to change the settings and establish
a schedule for each alarm output from the DVR.
Figure 34 : Device – Alarm-Out setup screen.
Highlighting the box beside Dwell Time and pressing the button allows you to set the dwell time of the alarm output.
Dwell times range from 5 seconds to 15 minutes.
Each alarm output can be given its own title by highlighting Title... and pressing the button. A virtual keyboard
appears allowing you to enter the title.
You can add and edit alarm output schedules. Highlight the + and press the
button to add a schedule. Highlighting
the boxes under the Column heading and pressing the button allows you to edit the information in those boxes.
Highlighting the boxes under the Day box and pressing the
button allows you to select the days that the alarm schedule
will be active. The choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
Highlighting the boxes under the Range box and pressing the button allows you to set the time that the alarm schedule
will be active in 15-minute increments from 00:00 to 24:00.
Highlighting the boxes under the Mode box and pressing the button allows you to set how the alarm reacts during
the scheduled time. When set to On, the Alarm-Out is active during the scheduled time. When set to Event, the
Alarm-Out is only active when there is an Event during the scheduled time.
Highlighting the boxes under the Channels box and pressing the button allows you to set which alarm outputs will
be active. You can also select the DVR's internal buzzer.
The box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish
to delete the schedule.
51