Edit Group: Selecting
Live Monitoring – Active Cameo Mode section for details.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.
Export
EZ Copy: Selecting
icon displays at the bottom-left corner of the screen. Selecting EZ Copy again will set the ending point of the video
to be clip copied and displays the Clip-Copy screen. See the following Clip Copy section for details.
Clip-Copy: Select
the following Clip Copy section for details.
Print: Selecting
(Export) → Print allows you to print a selected image. See the following Print section for details.
Digital Deterrent Recording: Selecting
files from recorded audio on the DVR. Refer to Chapter 3 – Configuration – Digital Deterrent section for details.
Status
Selecting
(Status) in the Search menu allows you to check the status of the DVR's system, inputs and storage. Refer
to the previous Live Monitoring – Status Monitoring section for details.
NOTE: Selecting Status will only be enabled for a user who has System Check authority.
Data Source
Selecting
(Data Source) in the Search menu allows you to select the data source to be searched. Selecting Record
searches recorded data on primary storage installed in the DVR, and selecting Other searches recorded data on storage
used for another DVR then installed in this DVR.
Exit
Selecting
(Exit) in the Search menu exits the search mode and enters the live monitoring mode.
Event Log Search
(Camera Menu) → Edit Group enters to the Active Cameo mode. Refer to the previous
(Export) → EZ Copy will set the starting point of the video to be clip copied, and the
(Export) → Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup. See
(Export) → Digital Deterrent Recording allows you to extract audio
Figure 48: Event Log Search screen.
Digital Video Recorder
65