Alarm-Out; Figure 27: Device - Alarm-Out Setup Screen - Speco D4CX Operation Instruction Manual

Operation Instruction
Highlight the box beside To and press the
button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be to the last recorded audio . When highlighting and pressing
the button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside File name and press the button to select the file name. The selected audio file can be listened
by highlighting and pressing the button.
Once you have selected the file name, highlight the Start button and press the
button to record the extracted audio
file (up to 10 seconds).

Alarm-Out

Figure 27: Device – Alarm-Out setup screen.
Highlighting the box beside Dwell Time and pressing the
button allows you to set the dwell time of the alarm output.
Dwell times range from 5 seconds to 30 minutes.
Each alarm output can be given its own title by highlighting Title... and pressing the button. A virtual keyboard
appears allowing you to enter the title.
You can add and edit alarm output schedules on this screen. Highlight the + and press the
button to add a schedule.
Highlighting the boxes under the Column heading and pressing the button allows you to edit the information in
those boxes.
The Day box allows you to select the days that the alarm schedule will be active. The choices are: Sun, Mon, Tue,
Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm schedule will be active in 15-minute increments from 00:00
to 24:00.
The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On, the Alarm-Out is
active during the scheduled time. When set to Event, the Alarm-Out is only active when there is an Event during the
scheduled time.
The Channels box allows you to set which alarm outputs will be active. You can also select the DVR's internal buzzer.
The box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish
to delete the schedule.
40