Setup Password; Auto Assign - AMX Color Active-Matrix LCD Instruction Manual

Figure 91
Password keypad
Figure 92
AUTO ASSIGN buttons
Color Active-Matrix LCD Mini-Touch Panels

Setup password

Press the SETUP PASSWORD button to open the password keypad ( Figure 91) and
change the Setup page password number.
1988 SET
SET TIME
0
AND DATE
2 3
1
SET TIME SET
4 5 6
DOUBLE
BEEP
7 8 9
v2.xx
AXlink
CLEAR 0 ENTER
The password number range is 1 through 9999. (Do not use zero.) Do not change the
Setup page password unless you are concerned about unauthorized access to mini-
touch pages. If you change the password, write the new number down and keep it in
a secure place.
CLEAR Clears the keypad number.
ENTER Sets the password number, closes the keypad, and returns to the
Protected Setup page.

Auto assign

Press the AUTO ASSIGN button to assign channel code numbers for new buttons.
Channel code numbers are used by the mini-touch panel and AXCESS Control
System to keep track of operations you assign to each button. Auto Assign is on
when the button background is black with white text, and off when the button
background is white with black text ( Figure 92).
AUTO
ASSIGN
On
AUTO
ASSIGN
Off
Mini-Touch Panel Program Reference 63