Set The Level Code; Set The Video Display - AMX Color Active-Matrix LCD Instruction Manual

Figure 66
Attributes page for a bargraph
Color Active-Matrix LCD Mini-Touch Panels
Touch the bargraph to open the Attributes page shown in Figure 66.
3.
CHANNEL LEVEL
CODE CODE
NONE 0
FEEDBACK: BAR GRAPH
FUNCTION: VERTICAL DISPLAY
EXIT
EXIT
NO CHANGE

Set the level code

Press LEVEL CODE in the Attributes page to open the level code keypad.
1.
Type 8 in the keyboard. The AXCESS software program uses level codes 1
2.
through 8 to identify the bargraph and its associated operations. Refer to Mini-
Touch Panel Program Reference for more information.
Press ENTER to store the level code in memory.
3.
Press EXIT in the Attributes page to store the new bargraph attributes in
4.
memory and return to the current page.
Press EXIT in the editor bar to exit the attribute's mode.
5.

Set the Video Display

After you add a Video Setup button on a page, you can open the Adjust Attributes
page that sets the incoming video signal's brightness, contrast, color, tint, and
compatible video signal. You must connect a live video source to the RCA video
port on the mini-touch panel's rear panel to perform these steps. The Video Setup
button is only available with mini-touch panels equipped with a video port. Go to
Link the New Page to the Main Page instructions if the mini-touch panel is not
equipped with a video port.
Press ICONS on the editor bar to open the icons menu shown in Figure 67.
1.
BRING
BUTTON
TO FRONT
Designing a Mini-Touch Panel Page 45