128
Replacing the Lithium Batteries
Carefully pry one battery out of its socket and insert the new battery.
6.
Return the mini-touch panel to the Back Box or equipment rack and connect the
7.
AXlink connector back into the rear side of the panel for approximately 1
minute. Then, remove the connector from the panel again.
Flip the touch panel facedown onto a soft cloth and carefully remove the other
8.
battery out of its socket and insert the new battery.
Return the touch panel to the back box or equipment rack and reconnect all
9.
connectors.
Insert the four mounting screws and tighten.
10.
Place the engraved overlay onto the touch panel's bezel.
11.
Color Active-Matrix LCD Mini-Touch Panels