Table of Contents
Advertisement
Color Active-Matrix LCD Mini-Touch Panels
Remove the four #6-32 mounting screws and carefully lean the mini-touch panel
3.
backward to expose the connectors.
Disconnect the connectors and remove the mini-touch panel from the Back Box
4.
or equipment rack.
Flip the mini-touch panel facedown onto a soft cloth and carefully pry the 128K
5.
IC out of the 32-socket connector with a non-conducting flat-blade tool and
insert the new 512K IC.
Return the mini-touch panel to the Back Box or equipment rack and connect the
6.
4-pin AXlink connector, optional RCA video connector, and insert the four
mounting screws and tighten.
Place the engraved overlay onto the touch panel bezel.
7.
512K Memory Upgrade
131
Advertisement
Table of Contents
