Table of Contents
Advertisement
Note
Set the LEVEL CODE to 255 to
create a slider that shows the
battery charge level for a
WavePack WAV-PKM, or
SmartPack SMT-PKM. The
slider fills from left-to-right as
the voltage level increases.
Figure 139
Feedback options page
Note
The bargraph uses shading to
indicate control levels and the
slider uses a slider bar.
Figure 140
Display options
Color Active-Matrix LCD Mini-Touch Panels
LEVEL CODE
Opens the keypad to set the level code for the vertical graph.
The level codes 1– 8 identify the vertical graph in the AXCESS software
program. Refer to the AXCESS Programming Guide for more information.
BRING BUTTON TO FRONT
vertical graphs. This option s tacks vertical graphs for complex arrangements.
FEEDBACK
Opens the Feedback options page shown in Figure 139.
BAR GRAPH
The feedback options are BAR GRAPH and SLIDER. Feedback can be sent by the
mini-touch panel or the AXCESS Control System.
BAR GRAPH
Sets the vertical graph to a bargraph and returns to the
Attributes page. The shaded portion of the bargraph can be set to control a
device, or display a status change when the mini-touch panel is connected to
an AXCESS Control System.
SLIDER Changes the vertical graph into a slider and returns to the
Attributes page. The slider can be set to control a device, or display a status
change when the mini-touch panel is connected to an AXCESS Control
System.
FUNCTION
Opens the display options shown in Figure 140. Choose one of
the options to set the vertical graph attribute.
VERTICAL DISPLAY
HORIZONTAL DISPLAY
VERTICAL ACTIVE
HORIZONTAL ACTIVE
VERTICAL CENTER
HORIZONTAL CENTER
Sets the alignment position of two or more
SLIDER
Mini-Touch Panel Program Reference
93
Advertisement
Table of Contents
